Ceramic Fiber
Español LinkedIn Twitter Facebook

Phone: +1 (704) 946 2427

Toll Free USA: +1 (855) 596 2427

E-service
Back to products

Ceramic Fiber

MaxWool™ Ceramic Fiber is composed of long flexible, interwoven fibers manufactured by the “spun” process yielding a strong, lightweight, durable product. This material can be used for applications with temperatures from 1000°F (538°C) to 2600°F (1425°C). MaxWool™ Blankets have high tensile strength for longer life and durability. Maxwool Ceramic Fibers contain no binders and are completely inorganic.

    Features
  • Low Thermal Conductivity
  • Low Heat Storage
  • High Tensile Strength
  • Thermal Shock Resistance
  • Sound Absorption
  • Easy to Install
  • Contains no Binder
  • Contains no Asbestos
  • No Curing on Dry Out Time Required
    Typical applications
  • Refining and Petrochemical
  • Reformer and Pyrolysis Furnaces
  • Tube Seals, Gaskets and Expansion Joints
  • High Temperature Pipe, Duct and Turbine Insulation
  • Crude Oil Heater Linings

    Steel industry
  • Heat Treating and Annealing Furnaces
  • Furnace Door Linings and Seals
  • Soaking Pit Convers and Seals
  • Furnace Hot Face Repairs
  • Reheat Furnaces
  • Ladle Covers
    Power generation
  • Boiler Insulation
  • Boiler Doors
  • Reusable Turbine Covers
  • Pipe Covering

    Other applications
  • Insulation of Commercial Dryers and Covers
  • Veneer Over Existing Refractory
  • Stress Relieving Furnaces
  • Glass Furnace Crown Insulation
  • Fire Protection
    Ceramic industry
  • Kiln Car Insulation and Seals
  • Continuous and Batch Kilns
maxWool Ceramic Fiber

MaxWool Ceramic Fibers come in 2 chemical formulations: HPS (2300⁰F/1260⁰C) and HTZ (2600⁰F/1427⁰C). HPS Blanket is made from a blend of Alumina and Silica. This product can be used up to 2300⁰ intermittently and continuous use up to 2150⁰F (1177⁰C). Our 2600⁰ Blanket, HTZ is made from a blend of  Alumina-Zirconia- Silica  and can be used to a continuous use temperature of 2450⁰F (1343⁰C). Both products have high tensile strength and durability for longer life.

MaxWool Ceramic Fibers can be used in various applications which include Petrochemical, Refining, Steel, Ceramic, Glass, Fire Protection and Power Generation.  This product can be fabricated and shop installed for most applications.

MaxWool Ceramic Fibers are easy to install, require no curing or dry out time. Rapid heat up can be achieved with all MaxWool Ceramic Fiber; they will not crack or spall and are thermal shock resistant. This product saves energy. It reduces heat loss and heat storage versus other hard refractory products.

MaxWool Ceramic Fibers have excellent chemical resistance. The only exceptions are Hydrofluoric and Phosphoric acid. MaxWool Ceramic Fibers can be manufactured in densities of 4#, 6#, 8#. The thickness of MaxWool Blankets are ½”, 1”, 1½” and 2”.  Special sizes and lengths are available upon request.