Module Hardware | High Temperature Insulation Wools | Nutec
Español LinkedIn Twitter Facebook

Phone: +1 (704) 946 2427

Toll Free USA: +1 (855) 596 2427

E-service
Back to products

Module Hardware

WELD-TITE MODULE Attachment is a speed weld system that requires no stud pattern or furnace layout. The advantage to this attachment system is the speed of installation.
Just fire the speed weld gun which attaches the stud to the furnace casing and then tightens the module onto the stud. MaxBlok™ Modules can be installed in a Uni-directional (with batten strips) or in a Parquet pattern.

STUD-TITE MODULE Attachments requires a stud pattern or furnace layout before installing the modules. After the furnace layout is completed, each stud is welded to the furnace casing. The modules are then positioned over the stud and secured with a threaded nut. There are no blind welds when using the Screw-Tite system. This attachment provides longer furnace life. MaxBlok™ Modules can be installed in a Uni-directional (with batten strips) or in a Parquet pattern.

H ANCHOR MODULE Attachment can be used for standard size modules or with Macro Modules (larger size modules). This hardware system provides a strong and durable linng for longer furnace life. This attachment is quick and easy to install. The H Anchor is welded to the furnace shell and a module is slid over both sides of the anchor. Using this system, MaxBlok™ Modules can only be installed in a Uni-directional pattern with batten strips.

maxBlok Module Hardware